Ceyear 87230 Series, Quick Start Manual

Page: 23 / 27

3 Typical Applications
3.4 CW Power Measurement
16
Step 1. Zero the USB CW power sensor;
Step 2. Set the frequency of the signal to be tested;
Step 3. Carry out power measurement of the continuous wave with the sensor.
When multi-channel measurement shall be carried out, the user can directly insert several USB CW
power sensors into the computer or build a multi-channel power test system with USB HUB, as shown in
Fig. 3.4.
Fig. 3.4 Multi-channel Power Test with USB HUB
The specific operation steps are as follows:
Step 1. Open the virtual power test panel, and the system will automatically find the connected USB
CW power sensors, and then select all connected power sensors, and click
“
Connection
”
button. As
shown in Fig. 3.5, the system will automatically display the USB CW power sensor found first and display
the measurement results;