- 34 -
or to other of your needs. In this case you can correct the value
perceived by the probe using the following procedure while
keeping the correction within the -5 to +5 ° C range.
PROCEDURE:
From the settings
SETUP
menu, using the
selector
select and click
ADVANCED
.
Turn the selector until you find the next screen. In field 16 (see
page 6) the actual parameter value appears (0.0 °C default
setting if you have not already altered it). If you wish to change
it click
to enter the menu.
Screen
-M13.3-
If you wish to proceed with the change, turn the selector
until the desired value appears and click to confirm.
AUXILIARY INPUT – EXTERNAL PROBE
INPUT
EXTPROBE
ENJOY is prepared for the connection of a second probe, external
to the device. This probe’s function could be the simple detection
of the temperature of a place different to that where you
installed ENJOY, for example outside the home or another room.
When the external probe with this pure display function is
connected, the relative screen will show the type indication at
the start of the two character rows:
