- 18 -
OPERATION IN AUTOMATIC MODE
Screen
-M8-
Standard operation in automatic (
programmed)
mode
Operation in automatic (
programmed
) mode is based on the
values of the three usable temperatures (COMFORT, ECONOMY,
FROST) and on the programmes that indicate to ENJOY
throughout the day, to which of the three temperatures the room
temperature should be regulated in each of the 24 hours.
In addition, each day of the week can have, at most, one
different programme from the other days.
All these parameters can be adopted using the default values
set at the factory
-M8-
this is an example, but all can be
changed from the
SETUP
menu (see page 19).
Many other parameters than those mentioned can be set
individually. They can be seen in detail further ahead in this
User Manual.
- During operation in programmed mode you can use ENJOY’s
following controls:
- with the left key
you can go to manual mode
- with the right key
you can access the first level
settings menu
- by turning the selector knob clockwise or anti-clockwise
the setpoint value will increase or decrease
or
. If
