Qmix λ Hardware Manual
17
The larger module is equipped with the SMA 905 connector by default. Insert the fiber of the external
light source into the connector and tighten the union nut.
6.4
Changing the light source (small module)
You can replace the LED attachment, for example in order to change the wavelength of the emitted
light. To do this, remove the two marked screws with a phillips screwdriver and then simply exchange
the LED attachment. Please do not remove the smaller screw in the centre.
If you want to mount the SMA 905 adapter instead of the LED light source, remove the two screws with
a 2 mm Allen key and then pull out the mounting plate. Make sure that the window and the O-ring
remain in the central recess of the connection piece. Now you can plug in the SMA 905 adapter and
fasten it with the accompanying Phillips screws.
LED light source
SMA 905
connector
Dial
Lösen
Unscrew
Do not unscrew!
