cetis TeleMatrix 9700 Series User Manual Download Page 10

10 

www.telematrix.net

  

9600 SERIES ANALOG USER GUIDE

Statement of Limited Warranty

TELEMATRIX, INC . warrants to its [original 
end customer] [purchaser] that Spectrum 
PLUS, Marquis and RETRO branded products 
manufactured by  

TELEMATRIX, INC . are free 

from defects in materials and workmanship for 
five (5) years after the date of purchase, products 
manufactured by TELEMATRIX, INC . are free from 
defects in materials and workmanship for three 
(3) years, other than the following products for 
which the warranty period shall be one (1) year: 
handset batteries, either NiCd or NiMH, used in 
TELEMATRIX, INC . cordless products . If a product 
fails this warranty during the warranty period, 
TELEMATRIX, INC . will, at its option, either repair 
or replace the defective product or parts, or 
deliver replacements for defective products or 
parts on an exchange basis at no additional charge 
to the customer except as set forth below . Repair 
parts or replacement products may be either new 
or reconditioned . Products or parts returned to 
TELEMATRIX, INC . under this warranty will become 
the property of TELEMATRIX, INC . Warranties on 
products repaired by TELEMATRIX, INC . expire at 
the termination of the original warranty period .

This limited warranty does not cover

  1 .    Products or parts which are damaged, 

abused or misused;

  2 .    Any damage resulting from improper 

installation, maintenance or operation of 
the product;

  3 .    Damage resulting from unauthorized 

modification or repair of the product, or 
from improper connection of the product to 
other equipment; 

  4 .    Cords, connectors and replaceable batteries;
  5 .    Damage in transit to the TELEMATRIX, INC . 

repair facility;

  6 .    Any product or part unless proof of date 

of purchase is submitted with the product 
when returned for warranty repair; or

  7 .   Once you have successfully registered the 

handset, you may now place the handset 
into a charging station, or use as the base 
handset . 

  8 .   Repeat steps 1–5 to register additional 

handsets . 

•  Registering a new handset to a given base 

unit does not affect the registrations of other 
handsets that were previously registered to this 
base . 

•  Likewise, power failures or removal/

replacement of the handset battery do not 
affect registration . 

•  There is a maximum of four handsets which 

can be registered to a single base . 

•  Once all registration slots have been used 

up on a base and you can no longer register 
an additional handset, it will be necessary to 
delete ALL handset registrations from the base 
unit, and then start over by re-registering all 
the handsets . 

TO DELETE ALL REGISTERED HANDSETS 

FROM A BASE UNIT 

  1 .   Remove DECT handset from base unit 

cradle and remote charging station . 

  2 .   Unplug line cord from rear of base unit and 

wait 3 minutes . 

  3 .   Press and hold down LOCATE button on the 

base unit . 

  4 .   While continuing to hold down the LOCATE 

button, plug the line cord back into the base 
unit . 

  5 .   Continue to hold down the LOCATE button 

for 5 more seconds, after plugging in line 
cord . 

  6 .  Release LOCATE button . 
  7 .   This handsets are now de-registered from 

the base unit . 

  8 .   Continue with the above registration 

procedure to re-register each handset to be 
used with this base unit .

10 

www.telematrix.net

  

9700 SERIES ANALOG USER GUIDE

Summary of Contents for TeleMatrix 9700 Series

















Reviews: