Cetetherm Mini Plus CM737
Installation, service and operating instruction
14
7.5
Setting the day
1. Press the DAY button to begin setting the day, (1-7=mon-sun).
Each press will move the day indicator one step forward.
After 7 it will start over again at 1.
Press the green
button to confirm.
7.6
Setting the time
1. Press either of the
or
buttons once to enter timer setting mode.
The LCD screen flashes the time digits. When the unit is powered for the
first time the display shows 12:00.
2. Use the
or
buttons to set the correct time then press the green
button to confirm.
Each press of the buttons will change the time by one minute and holding them down will change the
time slowly at first and get progressively quicker.
NOTE
: to leave this mode, press the
AUTO
,
MAN
or
OFF
buttons.
