Cetetherm AquaEfficiency
Installation, service and operating instruction
53
Factory RESET
After a reset must the controller be re-configured, see
Especially the number of pumps must be configured.
1. Press both
and
for 5 seconds.
2. Rotate the wheel; select the last line, program name with a star at
the end.
3. Press the wheel a few seconds and the program will start after 1
minute.
Settings are now factory settings.
Note that on some software versions, the displayed language can be
changed.
1. Rotate the wheel clockwise to display all available languages.
2. Select and press the wheel.
3. Select
Factory
line and press the wheel, this will restart the
controller.