Cetetherm AquaEfficiency
Installation, service and operating instruction
45
The Auto test sequence described in the picture is a general test procedure. It may vary depending on
connected components.
NOTE:
A pump fault may occur after Auto test. In this case, clear the alarm according to
11.17 Clear alarm menu
Accessing the Clear Alarm menu requires login at Technician level.
All alarms are cleared the same way.
Parameter
Factory
Default
Setting
Optional
Setting
Description
High_Alm_Reset
Off
Off/On
Select
On
to clear the alarm, then return to
Off
or wait a few seconds for automatic return to
Off
Off: the alarm is cleared
Pump-Fault_Reset
Off
Off/On
Select
On
to clear the alarm, then return to
Off
or wait a few seconds for automatic return to
Off
Off: the alarm is cleared
