background image

 Instruction Handbook                              PFP-6hp-FL  

- 20 -

 

 

C.E.T. Fire Pumps Mfg. This handbook is subject to change without notice, 

Contact your local C.E.T. dealer or C.E.T. direct to ensure you have the latest version.

 

 

12.

 

 

General Warranty 

 
C.E.T. FIRE PUMPS MFG. warrants to the original purchaser that C.E.T. FIRE PUMPS MFG. will, 
at its election, either replace or repair any part of the new equipment sold to the purchaser 
hereunder  which  has  been  given  no  abnormal  use;  and  which  has  received  proper 
maintenance; and which is determined by C.E.T. FIRE PUMPS MFG. to be defective in material 
or  workmanship;  and  which  has,  within  three  (3)  years  after  delivery  to  the  purchaser  be 
returned  at  the  purchaser's  expense,  with  transportation  charges  prepaid,  to  C.E.T.  FIRE 
PUMPS MFG. factory OR which has, within three (3) years after delivery to the purchaser, been 
pre-approved by C.E.T. FIRE PUMPS MFG. for a third-party to perform the work.  All problems 
shall be reported to C.E.T. FIRE PUMPS MFG. in writing and damaged parts shall be returned 
to C.E.T. FIRE PUMPS MFG.. 
 
 
Exclusions from warranty 
 
1.  C.E.T.  FIRE  PUMPS  MFG.  incurs  no  liability  under  this  warranty  or  otherwise  for  parts, 
accessories  or  components  not  manufactured  by  it,  but  purchased  for  assembly  into  the 
equipment,  but  C.E.T.  FIRE  PUMPS  MFG.  will  assign  to  the  Purchaser  whatever  warranty 
rights are extended by the supplier of such part, accessory or component 
 
2. C.E.T. FIRE PUMPS MFG. incurs no liability under this warranty or otherwise, for equipment 
which has been abused, altered or improperly maintained, or for equipment which has been 
returned for inspection or repair more than ten (10) days after defect complained of has been 
or should have been discovered by the Purchaser, or Equipment which is operated after the 
defect has been discovered. 
 
3. C.E.T. FIRE PUMPS MFG. incurs no liability for alteration or repairs unless the Purchaser 
first receives C.E.T. FIRE PUMPS MFG. / written consent or approval.  C.E.T. FIRE PUMPS MFG. 
will not be responsible for work or repairs made or done by others. 
 
4.  C.E.T.  FIRE  PUMPS  MFG.  incurs  no  liability  for  design  alterations,  parts,  accessories  or 
components which are not standard but are specified by the Purchaser for incorporation into 
the equipment. 
 
Interpretation 
C.E.T. FIRE PUMPS MFG. shall not be liable for transportation charges either in shipment to 
or by it and shall not be liable for loss of use, or consequential damage of any kind in 
connection with the sales, alteration, repair or replacement of any equipment or part thereof.  
Liability under this warranty is limited to replacement or repair and in any event shall not 
exceed the purchase price paid.  This warranty is not transferable by the Purchaser.  C.E.T. 
FIRE PUMPS MFG. reserves the right to make changes in design or add any improvements to 
the Equipment at any time without incurring any obligation to install or modify same on other 
equipment previously supplied. 

 

There are no other warranties, conditions or representations, expressed or implied, except 
the above. 

Summary of Contents for PFP-6HP-FL






















Reviews: