Instruction Handbook PFP-6hp-FL
- 13 -
C.E.T. Fire Pumps Mfg. This handbook is subject to change without notice,
Contact your local C.E.T. dealer or C.E.T. direct to ensure you have the latest version.
7.6.
Put the control throttle in starting/choke position (choke is applied
further the full throttle position).
WARNING: Always make sure a trained person firmly holds the extremity of
the discharge hose before starting the engine. The hydraulic power of the
pump could cause the hose and nozzle to move violently and cause material
damage, severe injuries or even death.
7.7.
*Start the engine by pulling on the recoil starter handle.
*Check the
engine owner’s manual for the starting and stopping procedure.
WARNING: Make sure you know the stopping procedure of the engine
before starting it.
7.8.
Decrease the engine speed to release the ‘’choke mode’’.
CAUTION: NEVER run the pump dry for more than one (1) minute, it could damage
the mechanical seal.
7.9.
When you finish priming, raise the pump to empty the pump.
CAUTION: NEVER run the pump with the exhaust port closed once the priming is
completed. As soon as the pump is running by it-self it is important to open the
exhaust port.
7.10.
You can adjust the ratio flow/pressure by two means.
7.10.1.
Adjust the throttle of the engine to desired pressure.
