Instruction Handbook PFP-13hpHND-EM-HP80
- 9 -
C.E.T. Fire Pumps Mfg. This handbook is subject to change without notice,
Contact your local C.E.T. dealer or C.E.T. direct to ensure you have the latest version.
The assembly includes
•
High quality Honda GX390 gasoline engine.
•
Centrifugal pump with three (3) outlets.
•
Self priming system.
•
Handling and protective frame.
•
Throttle control system.
•
One (1) sealed 12V battery.
The pump requires
•
Oil (See the engine operator manual)
•
Fuel (See the engine operator manual)
•
A debris free
source of water of at least 12’’ deep.
•
A fully charged properly connected. (if the engine is equipped with an electrical
starter)
•
Install in a properly ventilated area.
Recommended individual protective equipments (not included)
•
Firefighting grade protective gloves (conforms to EN659 or equivalent).
•
Protective glasses.
•
Hearing protection
Intended use for application
This pump has been designed to move water for fire-fighting purposes. It has been
engineered to run under the constant supervision of an operator properly trained.
The pump was assembled according to the intended use of the engine
manufacturer. Any use that doesn’t conform with the previously stated intended
use is not authorized unless C.E.T. Fire Pumps Mfg. gives such authorization in
writing. A violation of this agreement could compromise the safety of the
personnel working near the pump
. The manufacturer’s responsibility would
be
voided by C.E. Thibault Ladders Inc. and/or C.E.T. Fire Pumps Mfg. for damages
resulting from unauthorized use.
