background image

 
 
 
 
 
 

 

 
 
 

4

1.4 Component List 
These items are included in your starter kit of GlucCell

TM

 Glucose 

Monitoring System: 

1. User’s 

Manual 

2. 

Quick Reference Card 

3. Glucose 

Meter 

4. 

Glucose Test Strip 

5. Check 

Strip 

6. Code 

Key 

 

7. 

3V Li+ Battery (inside the meter) 

8. Carrying 

Bag 

 

 

* Quantity varies according to the order 

6

4

 
1.5 About the Glucose Meter 
1.5.1 Front-side of the Meter 

1 LCD 

Display

 

Shows test results and other information. 

2 Mem/Set 

Button(M/S 

Button)

 

Turns the meter on/off (press and hold for 
4 secs to turn off) 

Enters into Memory Mode 

Changes parameters in Set mode 

3  Func. Button(Func. Button)

 

Turns the meter on 

Enters into Set Mode   

Confirms parameters in Set Mode 

 

4 Strip 

Slot

 

The slot is a connector for the glucose test strip, 
Code Key, and Check Strip. 

2

 
1.5.2 Backside of the Meter 

1 Data 

Port

 

Used with the optional GlucCell

 TM

 transferring cable 

and GlucCell

TM

 Manager software for data transfer 

from the meter to a computer for analysis. 

 
 

2 Battery 

Cover

 

Slides down for battery access. 

 
 

Summary of Contents for GlucCell




















Reviews: