CESCO GlucCell User Instruction Manual Download Page 18 | Manualshive

Page: 18 / 19

CESCO GlucCell User Instruction Manual Download Page 18

17

Display
Message:

Cause Solution

Meter electronics
failure

Perform Check Strip Test (refer to Section 8.1)
#

Display
Message:

Cause Solution

The test strip may
be moist

Replace with a new glucose test strip.

The test strip may
have already been
used

Replace with a new glucose test strip.

Display
Message:

Cause Solution

The test strip is
defective

Replace a new glucose test strip

# - If the error message repeats, please contact your local dealer for
help.

Chapter 10 Taking Care of your Glucose Meter

The glucose meter does not need special care.

When the meter is dirty, clean

it by wiping gently with a cotton swab or cloth. Do not use any liquids to clean the meter.

The following tips will help to keep the meter working properly:
Keep the meter, test strips and code card away from very high and
very low temperatures, and free from dust and dirt.
Keep the meter away from water or any other liquids.
Do not drop the meter.
Store the meter in the carrying bag and keep in good condition when
not in use.
Keep the meter away from UV.

«
...
16
17
18
19
»

Summary of Contents for GlucCell




















Reviews:

No comments