CES GPS-205 User Manual Download Page 5

© CES Wireless Technologies Corp 

– 2007  Page 

5 of 16

1.0

Introduction

The GPS-205 is one of the smallest and most economical GPS asset tracking devices available today. It is 
a ruggedized unit, with aluminum extrusion and end caps, affording some protection for environmental
elements. This device is neither weather, dust or splash proof.

GPS and event data is made available on-board the GPS-205 for transmission to FleetLinc

(CES web 

based subscriber fleet management service).

The GPS-205 can also be licensed for use with POWER-

trak™ PC/Server software. Please contact CES 

for further direction with this.

1.1

About the GPS-205

The GPS-205 is an Automated Vehicle Locating (AVL) device that utilizes a GSM/GPRS cellular 
modem and a Global Positioning Satellite (GPS) module. Working together, these technologies allow the 
GPS-205 to simultaneously act as a stand alone GPS reporting device and wireless data retrieval unit. The 
GPS-205 provides a flexible AVL solution with two Inputs and one Output. The GPS-205 is designed to 
work as a stand-alone device in a vehicle. It requires DC power and an antenna (GPS and GSM).

1.2

About This Manual

This manual contains instructions on how to install and configure the GPS-205. Please follow the 
instructions closely to avoid damaging the GPS-205.

1.3

Basic Package Contents

The basic package will contain the following:

GPS-205 - GPS/GSM/GPRS Tracking and Fleet Management Device

12-Pin heavy duty connector with DC cable (HRNS-56)

Mounting Bracket

1.4

Accessories

The following accessories are available from CES Wireless Technologies:

ANT-06

Magnetic mount, combo, multi band GSM/GPS antenna

ANT-07

Through-hole/fixed mount, combo, multi band GSM/GPS antenna 

ANT-13

Loose/covert, combo, multi band GSM/GPS antenna

ANT-19 

Fixed mount, GSM only antenna

ANT-01 

Magnetic mount, GPS only antenna

ANT-02 

Fixed mount, GPS only antenna

PRG-02

Programming Cable - 12-Pin Serial I/O cable with DB-9 Connector/Pin insertion tool

GPS-205S 

Programming Software (can be downloaded from the CES FTP site, and is also available 
on CD-SOFT1 CD).

1.5

System Requirements

It is necessary to have a computer running Windows 2000, Windows XP or Windows Server 2003 to 
program the device. The system must include a serial port in order to configure the GPS-205.

1.6

GPS-205 Front and Back View

Front View: On the front of the GPS-205 is the GSM SIM Card Access. Note: the SIM Card Lock on the 
right side of the access window.

Summary of Contents for GPS-205

















Reviews: