
© CES Wireless Technologies Corp
– 2007 Page
12 of 16
Power to the GPS-205 can be supplied in three different methods, depending upon the application.
GPS-205 Always ON
Connect the power and ground wires of the GPS-205 to the battery leads. The GPS-205 will
always remain ON as long as the battery lasts.
The GPS-205 will be non-operational when the input voltage and current requirements are not
met (battery drains).
The Ignition wire has to be left open (not connected).
GPS-205 Turns Off when Ignition Turned Off
Connect the power line of the GPS-205 to an auxiliary power source, i.e. ignition.
Connect the ground wire to the chassis or negative terminal of the battery
The Ignition wire has to be left open (not connected).
GPS-205 with Ignition Turned Connected to Provide Ignition On/Off Events
Connect the power and ground wires of the GPS-205 to the battery.
Connect the ignition wire of the GPS-205 to an auxiliary power source, i.e. ignition.
Device goes through a reset upon ignition on.