CES SUPPORT 407-679-9440
Page 17
MAN71© CES 2010
7 = 200 ms
8 = 250 ms
9 = 300ms
Example: To program the sampling window to 95ms enter the following sequence: 55# 3#
Dialing mode (56#)
The method of dialing the phone line may be changed by using the 56# command. The choices available include
regenerated DTMF or pulse dialing at the rate of 10 or 20 pulses per second.
0 = DTMF
1 = Pulse (10 per second)
2 = Pulse (20 per seconds)
Example: To program DTMF dialing mode enter the following sequence: 56# 0#
Ignore COR to Ring Out (57#)
When set to 0 (factory default) the 4700VP will not Ring Out if the channel is busy (COR LED On). If answering
mode is set for COR only, this feature should be turned off. When programmed to ignore COR, the 4700VP will
ring out one time (if busy) alerting the mobile operator of an incoming call.
0 = no
1 = yes
Example: To turn the ignore COR off, enter the following sequence: 57# 0#
Answering a Call (58#)
For more flexibility, the 4700VP can be programmed to answer a call in 4 different ways or can be programmed to
ignore ring voltage for mobile initiated calls only.
0 = Ignore phone line
1 = Connect Code with COR
2 = Connect Code with COR & CTCSS
3 = COR & CTCSS
4 = COR only
Example: To program 4700VP to ignore the phone line ringing, enter the following sequence: 58# 0#
Hook Flash Period (59#)
This feature is used in conjunction with
call waiting
offered in some markets by the telephone company. This allows
the mobile user to answer a second call without disconnecting call in progress. The user can
flash
between calls by
momentarily activating the star (*) key plus 2 digits. The
flash
time period is programmable from 200ms ~ 800ms
or it may be turned off.
0 = off
1 = 200ms
2 = 250ms
3 = 300ms
4 = 350ms
5 = 400ms
6 = 450ms
7 = 500ms
8 = 550ms
9 = 800ms
Example: To enable
hook flash
enter the following sequence: 59# 1#
Connect / Access Code (60#)
Up to a 10 digit access code can be programmed in the model 4700VP (only characters 0 ~ 9 will be accepted, 3 or
more digits recommended). With no multi-digit code programmed, the default code is a single star (*) and single
pound (#) for disconnect.
NOTE: The * will always proceed the connect code and the # will always proceed the
disconnect code
Example: To program the 4700VP for a connect code of *123 enter the following sequence: 60# 123#
Toll Restrict Override Code (61#)
The Toll Restrict Override Code will give privileged users the ability to bypass the toll restriction table. The code
can be programmed for up to 10 digits string. This code must be different from the Connect code and other control
codes.
