Cervis Warrior MU-6E-HVA, Manual, Page: 8 / 21

Warrior MU6E
U107.1.0 2
1.0
Warrior MU6E
The MU6E is a modular receiver intended for use in industrial crane control applications,
including overhead bridge cranes. The MU6E is self-contained and can be configured with
various input/output (I/O) modules accommodating a wide range of I/O requirements. The MU6E
accepts control commands from the full range of Cervis, Inc. Warrior transmitters, including the
multi-joystick, multi-axis Warrior Console Box (CB).
The MU6E can be mounted using the included four-bolt mounting flange. The sturdy enclosure
allows the MU6E to operate in harsh weather conditions. Additional accessories
—including
antenna extension cables and integrated audible horn
—are also available.
1.1
Warrior MU6E Receiver
An MU6E can accept control commands from any transmitter that has the receiver identity (ID)
stored in its memory. The MU6E is limited to communicating with one transmitter at a time on a
first-come/first-serve basis. The rugged construction and I/O configurability allow Warrior
systems to be used in a wide variety of crane control applications.
Figure 1. Warrior MU6E Receiver
Warrior MU6E Features

Designed to IP65/67 standards

900 MHz license-free operation

Designed to ICS 8 NEMA Crane Specification

Modular design for maximum flexibility

Up to 48 configurable output relay contacts

Operating temperature of -40°F to +167°F (-40°C to +75°C * )

Storage temperature of -40°F to +176°F (-40°C to +80°C)
* 55°C continuous; 75°C peak tested for four hours