SmaRT HH-xH06
U076.0.4-SmaRT_HP-2/4/6_hhr
4
Figure 2. Standard PTO Six button Example
Notice in the example above that standard 6-button handheld pushbuttons are assigned to
specific SmaRT base unit outputs. This button layout applies to the two button and four button
PTO units where:
•
Pushbutton outputs 1 and 2 apply to two button units.
•
Pushbutton outputs 1 through 4 apply to four button units.
•
Associate and Dissociate buttons are factory-selectable and apply to all PTO handheld
remotes.
1.1 DO and OO Button Operation
DO (Dual Operation) and OO (dedicated ON, dedicated OFF) handheld remotes provide the
advantage of more control when the handheld remote is powered ON and OFF. A DO-206, for
instance, can have one of the six buttons—Button 6—dedicated as an ON/OFF (toggle) that
when pressed once turns the unit ON, and when pressed again turns the unit OFF. In the case
of an OO handheld—OO-206 for instance—Button 5 can be dedicated as an ON button while
Button 6 can be dedicated as an OFF button. See the examples in Figure 1 for DO and OO
button placements.
ASSOCIATE (button 1)
DISSOCIATE
(button 2)
TX blinking Green when transmitting
RX blinking Yellow when receiving
ER blinking Red when error occurs
Protective Bumper
Out 5
Out 3
Out 4
Out 6
Out 2
BA blinking Yellow when Low Battery
A1 (Axillary 1) Custom program use
A2 (Axillary 2) Custom program use
Out 1
