SmaRT BU-xH8D Base Unit Family
U088.4.4-SmaRT_BU-xH8D
4
2.2
Base Unit Power
Power is supplied to the base unit though the harness cable. The cable attaches to the base unit
P1 connector. Power can be removed from the base unit by disconnecting the 12-pin cable
connector from the base unit P1 socket. To remove the cable connector from P1, pinch the
latching ears of the connector (Figure 6) and pull the connector away from the unit.
2.3
Base Unit External Antenna
A base unit 900MHz or 2.4GHz external antenna attaches to the base unit using the connector
shown in Figure 5. Extensions and extension kits are available. See Table 3 for detailed
information.
Figure 5. BU-xH8D with External Antenna and Extension Cable
Connector
2.4GHz (or 900MHz)
Antenna
Antenna Extension Cable
