19
20
AERO THRU-AXLE INSTALLATION
To ensure rider safety, it is critical to install the Cervélo
Aero Thru-Axle correctly. Failure to do so may result in an
accident with potential for serious injury to the rider.
Tighten rear axle
to 12-15Nm.
Tighten
front axle
to 12-15Nm.
or
6mm Allen key /
torque wrench
Perform final tightening on
Rear Derailleur Hanger Nut
using a 17mm wrench. Torque
to 12-15Nm. This action is
unique to initial assembly,and
should not require additional
adjustment.
Adjust brakes as per manufacturer’s
instructions.
To secure wheels, install the greased axle, through the drop
out and the wheel hub, aligning the threaded end of the axle
with the threaded insert. Once aligned and engaged, thread
the axle (clock-wise) into the threaded component of the insert
until the axle is secured tightly.
Cervélo Aero
Thru-Axle with
Removable Handle
(QRA-AERO2-F &
QRA-AERO2-R)
