background image

 

SALT EXPERT Salt Chlorinator (V3) 

 

Page 15 

5.0 Warranty 

 
5.1. GENERAL ASPECTS 
5.1.1. In accordance with these provisions, the seller guarantees that the product corresponding 
to this Warranty presents no lack of conformity at the time of delivery. 
5.1.2. The Total Warranty period for the product is 2 YEARS, calculated as of delivery to the 
purchaser. The electrode is covered by a 2- YEAR WARRANTY (or 4.000 hours), which is not 
extendable. 
5.1.3. If there were any detect in the product and the purchaser informed the seller within the 
warranty period, the seller must repair or replace the product at its own cost where it deems 
fitting, unless this were impossible or disproportionate. 
5.1.4. When the product cannot be repaired or replaced, the purchaser may request a 
proportional reduction in the price, or, if the defect is substantial, the termination of the sales 
agreement. 
5.1.5. Parts replaced or repaired pursuant to this warranty will not extend the term of the 
warranty of the original Product, while will have its own warranty. 
5.1.6. For this warranty to be effective, the purchaser must accredit the date of purchase and 
delivery of the Product. 
5.1.7. When more than six months have elapsed between the delivery of the Product to the 
purchaser and the latter alleges a defect, the purchaser must substantiate the source and the 
existence of the alleged defect. 
5.1.8. This Warranty Certificate does not limit or prejudge the rights that correspond to the 
consumers by virtue of obligatory national legislation. 
 
5.2. SPECIAL CONDITIONS 
5.2.1. For this warranty to be effective, the purchaser must strictly follow the Manufacturer's 
indications included in the documentation supplied with the Product, when applicable 
according to the range and model of the Product. 
5.2.2. When a programme is specified for the replacement, maintenance or cleaning of certain 
parts or product components, the warranty will only be valid when programme has been 
followed properly. 
 
5.3. LIMITATIONS 
5.3.1. This Warranty will only be applicable to sales made to consumers, with “consumer” 
taken to mean any person that purchases the Product for a purpose outside the sphere of their 
own professional activity. 
5.3.2. No warranty is given regarding normal wear through the use of the product, or with 
regard to parts, components and and/or perishable materials or consumables (barring the 
electrode). 
5.3.3. The Warranty does not cover cases in which the Product: (i)) has been unduly handled or 
used; (ii) has been inspected, repaired, maintained or handled by an unauthorised person; (iii)) 
has been repaired or maintained with non-original parts or (iv) has been installed or started up 
incorrectly. 
5.3.4. When the Product defect is a consequence of an incorrect installation or start-up, this 
Warranty will only be effective if the installation or start-up is included in the Product contract 
of sale and was performed by the seller or under its responsibility. 
5.3.5. Damages or faults of the product due to any of the following causes: 

o Operation at salinities below 3 g/l of sodium chloride and/or temperatures lower than 
15oC (59oF) or higher than 40oC (104oF). 
o Operation at pH above 7.6. 
o Use of chemical products not explicitly authorised. 
o Exposure to corrosive environments and/or temperatures below 0oC (32oF) or above 
50oC (125oF). 

Summary of Contents for SALT EXPERT-3 Series
















Reviews: