3
About the product
The PU2 Mini LED Light is a full colour changing or mono-colour (RGBW), or single white (W) light. The RGBW unit offers the
flexibility to allow a choice of colours and shades, create programmable lighting sequences and to be dimmable. The W unit is a
simple on/off white light
It can be used as a stand alone light, or in multiples.
This product is specifically designed for use as an underwater swimming pool light. The light is IP68 rated making it suitable for
permanent immersion in water.
This product is a Class III electric apparatus – it is designed to be powered by a SELV (Safety Extra Low Voltage) power source.
WARNING
A qualified electrician must carry out all electrical wiring in accordance with local
electrical regulations.
Model No:
Description
PU2MLP
Mini LED Light (RGBW) – for concrete pools
PU2MLPW
Mini LED Light (White) – for concrete pools
PU2MLPL
Mini LED Light (RGBW) – for liner pools
PU2MLPLW
Mini LED Light (White) – for liner pools
The design of the PU2MLP and PU2MLPW lights makes them suitable for a push fit application into open ended 1
1
/
2
” Class C
piping, leaving just the fascia of the light visible on the swimming pool wall. These lights also come with an alternative sized o-ring
making them suitable for installation into 50mm Class C piping.
The design of the PU2MLPL and PU2MLPWL light makes them suitable for use in vinyl liner pools by means of a threaded
attachment into a new or existing Certikin liner inlet fitting.
RGBW units are designed to be operated and controlled by a separate Wi-Fi controller, driver unit and power supply. W units are
designed to be operated as an on/off light from a separate power supply.
10
Operation:
RGBW lights are operated via the control unit and/or App provided with the Wi-Fi 104 unit. Please refer to these instructions for
operational procedures relating to the light.
White lights are controlled by an in-line switch (not supplied) – this switch can be manual or automatic/timed.
WARNING
A qualified electrician must carry out all electrical wiring in accordance with local electrical
regulations.
Maintenance:
NOTICE
This product contains no serviceable or changeable parts. Do not attempt to open the light
housing. Opening the light housing will void all warranty.
Troubleshooting:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Light does not operate
No power to the light
Refer to qualified electrician to check wiring and power supply
Lack of control signal
Refer to Wi-Fi 104 instructions
Failure of single light
within bank of lights
Failure of single R4-CC driver Refer back to installer/qualified electrician – interchange alternative light
and test if working/test non-illuminating light with alternative driver to
test if working. Replace driver if appropriate.
Failure of single light
Refer back to installer/qualified electrician – interchange alternative light
and test if working/test non-illuminating light with alternative driver to
test if working. Replace light if appropriate.
