8
OPERA
TING INS
TRUC
TIONS
Points to be Observed before Operation
Before measuring, check the pointer to see whether it
exactly rests at the "0" position, and if not, adjust the
pointer with the zero set control ( Figure 3 ).
Insert the red test lead to the "+" jack and black test lead
to the "−" jack.
If the magnitude of the voltage or current to be measured is
not known beforehand, always set the selector switch to
the highest range, and then work down to an appropriate
range in order to avoid damage to the meter.
Don't touch any conductor with hand or skin to avoid
electric shock.
OPERATING INSTRUCTION
Figure 3
A.
1.
2.
3.
4.
The pointer exactly
rests at the "0" position.
Zero set control
