3
model no. 052-0059-8 | contact us 1-800-689-9928
WARNING
SAFETY INFORMATION
WARNING
The meter has been designed according to IEC-61010 concerning
electronic measuring instruments with a measurement category
III ( CAT III 300V ) and pollution degree 2.
To avoid possible electric shock or personal injury, follow these
guidelines:
Do not use the meter if it is damaged. Before you use the
meter, inspect the case. Pay particular attention to the
insulation surrounding the connectors.
Inspect the test leads for damaged insulation or exposed
metal. Check the test leads for continuity. Replace damaged
test leads before you use the meter.
Do not use the meter if it operates abnormally. Protection may
be impaired. When in doubt, have the meter serviced.
Do not operate the meter around explosive gas, vapour, or dust.
Do not apply a voltage or current higher than the selected
range's upper limit between terminals.
Before use, verify the meter's operation by measuring a known
voltage.
connecting the meter to the circuit. Remember to place the
meter in series with the circuit.
When servicing the meter, use only specified replacement
parts.
Use caution when working with voltage above 30 V AC RMS,
42 V peak, or 60 V DC. Such voltages pose a shock hazard.
a.
b.
c.
d.
e.
f.
g.
h.
i.
