Regulatory
FCC compliance statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC RF Exposure Information for PentaClass
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC RF Exposure Information (SAR)
for Runa microphone
Microphone Runa has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption
Rate (SAR) is a measure of the rate at which energy is absorbed by the human body when exposed to a radio frequency.
The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per
kilogram in countries that set the limit averaged over 10 grams of tissue.
During Testing, Runa was placed into Test Mode at maximum duty cycle transmissions using software commands. The
product was tested in the mode which produced the highest conducted power. Product was tested with the back side
of it while wearing a clip placed in positions that simulate RF exposure in usage near the body with the separation
0.0cm.
For this device, the highest reported SAR value for near the body is 0.134 Watts per kilogram. The FCC has granted an
Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display
Grant section of fcc.gov/oet/ea/fccid after searching on FCC ID: 2AFZR-CTPR2
Canadian regulatory statement
This Class A digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
CE Confirmation of compliance
Certes Technologies declares that PentaClass models A, AB, and Runa has been manufactured in accordance with
following directive:
• 2004/108/EG EMC Directive Electromagnetic Compatibility (EMC-directive)
• 2006/95/EC Low Voltage Directive (LVD).
It has been manufactured in accordance with the following harmonized standards, or parts therefore:
• EN 60950; EN 60065; EN 55032.
SAFETY
The device is labelled with CE label, which means that the device and its associated documentation meet the
requirements of Low Voltage Directive (LVD).
CONVERSION OF THE DEVICE
If the device is converted or supplemented with parts that the manufacturer does not approve, this declaration of
conformity will not apply to the parts which alter the function of the device.
If the device is upgraded or converted, it is very important to ensure that this instruction manual is also updated
immediately to include any new illustrations, photographs and text.
DEVICE IDENTITY
If the device is upgraded or converted, it is very important to ensure that this instruction manual is also updated
immediately to include any new illustrations, photographs and text.
Certes PentaClass Operating Manual
33
