C450R User Manual
Page 13
INSTALLING THE UNIT
Note
: The UPS charges the battery as soon as it is connected to the AC-power source, even if
the power button is not pressed.
Once the UPS is connected to the AC-power source, 8 hours of charging is required before the
battery can supply the rated backup time.
RACK INSTALLATION
Follow steps 1 to 4 for module mounting on the rails
Always keep 200mm of free space behind the UPS rear panel
Check that the indications on the name plate located on the top cover of the UPS meets
to the AC-power source and the true electrical consumption of the total load.
1.
Connect the UPS input socket to
the AC power source using the
cable of the protected
equipment.
2.
Connect the loads to the UPS
using the cables.
1
1
2
3
3
4
4
