C400 User Manual
Page 10
UPS INSTALLATION
INSPECTION
Every effort is made to ensure that CertaUPS systems are packaged as safely as possible to ensure that no damage is
incurred during shipment. Please visually inspect the UPS when it is received. Please keep all packaging in a safe place
for future use.
UNPACKING
The UPS unit must be positioned in a well-ventilated area that is free from excessive dust, heat and moisture. Please
take note of the specified operating temperatures and remain within these guidelines.
•
Unpacking the unit in a low-temperature environment may cause condensation to occur in and on the
device.
DO NOT
install the UPS/ External Battery Module (EBM) until the inside and outside of the devices are
clear of condensation.
•
The UPS/EBM units are heavy. Follow any special precautions provided on the packaging.
•
Unpack the equipment and remove all packaging materials.
DO NOT
lift the using the front panel and rear
panel.
Rackmount/Tower model
C400 BOX CONTENTS CHECKLIST
C400 Series UPS
USB A to B
Software CD
Quick Start Guide
Warranty Card
PLEASE ENSURE ALL SAFETY INSTRUCTIONS HAVE BEEN OBSERVED AND UNDERSTOOD PRIOR TO UNPACKING AND
INSTALLING THE UPS
IF THE DEVICE IS DAMAGED, PLEASE NOTIFY THE CARRIER IMMEDIATELY
PACKING MATERIALS MUST BE DISPOSED OF
IN COMPLIANCE WITH ALL LOCAL WASTE
MANAGEMENT REGULATIONS.
RECYCLING SYMBOLS ARE PRINTED ON THE
PACKING
MATERIALS
TO
FACILITATE
SORTING.
IF ANY OF THE ITEMS ARE MISSING FROM THE UPS BOX PLEASE NOTIFY YOUR SUPPLIER
DO NOT FORGET TO REGISTER THE UPS WARRANTY
WWW.CERTAUPS.COM/SUPPORT/WARRANTY-REGISTRATION/
