•
Do not turn on the power supply until the tank is full of water.
•
During operation, the tank mouth must be plugged hermetically and the
safety cap should be tightened in position.
•
While in use, the body of the unit should not be included at an angle
greater then 45 degrees. Otherwise the boiling water may be sprayed out
together with the steam.
•
Do not direct steam towards other people, animals or electrical products.
•
Before refilling the water, ensure the power cord has been unplugged
from the power supply. It is necessary to unplug the power cord after the
machine has been used, before it is cleaned and while it is being repaired.
•
Do not add rust remover, odour counteracting agents, alcohol or
detergents into the water tank.
•
The filling aperture must not be opened during use.
•
Never overfill the tank as the steam generation may be effected.
Product Specifications
Power supply rating:
AC 220-240V~ 50Hz
Tank capacity:
1.85L
Mac Capacity of Water Cup: 1.45L
Rated power:
2000W nominal
Steam pressure:
4-4.5bar
Steam availability:
Max. 32minutes/tank
Heating time:
Approx 8 minutes
Injected steam capacity:
44g/min
Overall dimensions:
430 x 250 x 260mm
Net weight:
3.45kg (without accessories)
Filling the Water Tank
The steam cleaner has a built-in water tank that will hold 1.5 litres. The steam
cleaner must be switched off and disconnected from the mains when filling or
topping up the water.
Unscrew the tank cap (Fig. 1) by pressing the cap down and simultaneously
turning it anti-clockwise. Use the funnel and measuring jug supplied when filling
with water (Fig. 2).
Fig. 1
Fig. 2
CAUTION
: Always test the steam cleaner first on a hidden or concealed area of
the surface or fabric to be cleaned to check its tolerance to the steam.
•
Steam may result in bleaching of painted/varnished wood.
•
Steam may discolour shiny plastics.
•
Acrylic, velvet or linen react very sensitively to the temperature of steam.
Do not use the steam cleaner on products without having first carried out a
2
