Layout
Charging Battery Pack
1. Remove the battery pack (3) from the handle, pressing the push lock
buttons (4) downwards to do so.
2. Check that your mains voltage is the same as that marked on the rating
plate of the battery charger. Plug the mains plug of the charger into the
mains socket outlet, turn on the power the green LED will illuminate.
3. Push the battery pack onto the battery charger. The green LED
extinguishes and the red LED will illuminate,which indicate that the
battery pack is being charged.
4. When the charging period is completed after approx 1 hour, the green
LED will illuminate and the red LED will extinguish.
5. The temperature of the battery pack may rise slightly during the charging
operation. This is normal. If the green LED extinguishes during charging,
the temperature is either above or below the perfect charging
temperature. In this case, pull the plug of the charger and charge the
battery in an environment in which the temperature is either warmer or
colder.
If the battery pack fails to become charged, please check
•
whether there is voltage at the socket-outlet
•
whether there is proper contact at the charging contacts on the charger.
If the battery continues to fail charging, please contact the Kogan customer
support team.
To ensure that the battery pack provides long service you should take care to
recharge it promptly.
You must recharge the battery pack when you notice that the power of the
cordless screwdriver drops.
Never fully discharge the battery pack. This will cause the battery pack to
develop a defect.
7
Summary of Contents for CT18VJIGSWA
Page 1: ......
