PanelVisa
A-22
Power and grounding specifications
Use DC24V as PV037 power input. The power consumptions are as following table. To
ensure
the
PV037/PV057
hardware
working
properly,
to
avoid
outside
electromagnetism noise, please ground the power source properly.
Items
Models
PV037-LSK
PV037-LST
PL037-LST
PV035-TST
PV035-TNT
PL035-TST
PV057-BST
PV057-LST
PL057-LST
PV057-TST
PV058-TST
PL057-TST
PV058-TNT
GD058-TNT
Power
consumption
24VDC
±
10%; 6W
24VDC
±
10%; 10W
Fuse Rating
0.5A
0.8A
Power grounding caution: The products are all equipped with power terminals and lock
assembling sets. The operating procedure is:
１．
Screw off the power terminal.
２．
Peel the 24V wiring(1.25mm) for 1 cm then plug in the power terminal.
３．
Use line screw driver to screw the power terminal tight.
Package content
We are appreciated for your purchasing our products. Our standard package should be
equipped with 5 items as following. Please check after receiving it. If there’s any
shortage, please refer to the suppliers.
PV035/037/057/058/GD057/GD058; PL035/PL037/PL057 unit x 1 (HMI Hardware)
Power terminal x 1 (power terminal)
Communication terminal x 1 (4-pin communication connector)
Installation screw nuts x 4 (Lock for assemble with screws)
PV037/PV057/PV058/GD058 Installation Guide x 1 (Installation manual)
Cautions
If this product is used in a house, radio-wave interference might occur to other devices.
In the case that it does occur, the user is requested to try a variety of remedies to solve
the problem.
