- 7 -
Wrench
Electrode
Flushing head
Installing a new electrode:
•
Untighten the flushing head about one turn (if not already lose) to let the air out
when the electrode is pushed in place.
•
Plug the electrode cable into the connector on the electrode.
•
Install the new electrode into the flushing head. Do not touch the membrane of
the electrode when mounting.
•
Tighten the flushing head and mount the protection plate, if needed. See below
for instructions on mounting the protection plate.
•
A new air-calibration must be performed whenever the electrode is changed.
Mounting the protection plate
Bend the plate slightly and press it down between the flushing nozzles. Ensure that the
plate fits into the notches on the flushing nozzles. Correct the plate when it is mounted.
Do not ever remove a flushing nozzle in order to mount the protection plate. The
nozzles are fastened with a special locking jam.
