Cerio DT-200N, User Manual

Page: 27 / 53

User’s Manual
DT-200N Wireless N-Series Streamlining Router
26
4.5 Wireless management
1. Wireless Basic
It contains the following parts: wireless basic, security, host filter, association table, advanced
Providing basic configuration items for wireless router users, including ”wireless network status”, ”Radio
Band”, ”Radio Mode”, ”SSID”, ”SSID broadcasting”, ”Channel width”, and ”Channel” seven basic configuration
items. Wireless basic configuration affects both primary and secondary AP
z
Wireless network status
You can choose “enable” or “disable” to enable or disable the “Wireless Network Status”, if what you
choose is “Disable”, the AP function of wireless router will be turned off
z
Radio band
You can select the wireless standards running on your network, If you have Wireless-G, and Wireless-B
devices in your network, keep the default setting, 802.11b/g Mixed
z
Radio mode
You can select radio mode of wireless router, the default setting is AP mode
z
SSID
You can input the wireless network name of “DT-200N” here, The default value is “default”
z
SSID Broadcasting
You can choose “enable” or “disable” to enable or disable the “SSID broadcasting”
z
Channel width
This switch allows you to set Router's wireless bandwidth modes:
20MHz: Setting the Router to this mode allows only 20MHz operation. This mode is compatible with
router, draft 802.11n,802.11g and 802.11b compliant devices, but will limit router, draft 802.11n
compliant device's bandwidth by half reducing bandwidth to 20MHz operation might solve some wireless