stored in the output queue. A packet stored in the output queue for a long time will lower the
free packet buffer, resulting in the poor utilization of the buffer and the poor switch
performance.
VLAN Striding:
You can choose VLAN Striding disable or enable function. When this
function is enabled, the switch will forward a uni-cast packet to the destination port. No matter
whether the destination port is in the same VLAN group.
IGMP Snooping V1 & V2:
You can choose IGMP Snooping disable or enable function. After
enable IGMP, will use both V1 and V2 function. If enable IGMP Snooping function, you can
choose disable or enable the IGMP Leave Packet. Mainly allows Leave packet will be
forwarded to IGMP router ports.
VLAN Uplink Setting:
Set “uplink1 or uplink2” or “Clear uplink1” or “Clear uplink2”
Click
“Save”
to confirm and finish the setting.
14. Logout
Click
“Logout”
The system will logout and automatically go to the login page.