Test the present chain length acc. to the description below.
If it turns out to be necessary to change the chain length, follow the
description below.
Chain length
STEP 1: Place the chain on the smallest cog on the cassette. To find the correct chain
length, pull the two chain ends together, just as you would when needing to cut a chain
to length. The lower part of the cage should start to move downwards, away from the
cassette, as referenced in the second image.
Test the present chain length acc. to the description below.
If it turns out to be necessary to change the chain length, follow the
description below.
Chain length
STEP 1: Place the chain on the small chain ring, through the derailleur cage, and the
smallestcog on the cassette. If you are using an electronic group set that does not allow
the ‘smallsmall’ combination, shift to the smallest cog possible while in the small front
chain ring. To findthe correct chain length, at the bottom span between chain ring and
derailleur cage, pull the two chain ends together. The lower part of the cage should start to
move downwards, away from the cassette, as referenced in the second image.
