FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 225 of 597
7.6.2.2 Editing a Queue Shaper Profile
To edit a queue shaper profile:
1 Select Ethernet > QoS > Shaper > Queue Profiles. The Queue Shaper
Profile page opens (Figure 164).
2 Select the profile you want to edit and click Edit. The Queue Shaper Profile
– Edit page opens. This page is similar to the Queue Shaper Profile – Add
page (Figure 165). You can edit any parameter except the Profile ID.
3 Modify the profile.
4 Click Apply, then Close.
7.6.2.3 Deleting a Queue Shaper Profile
You cannot delete a queue shaper profile that is assigned to a queue. You must
first remove the profile from the queue, then delete the profile. See Assigning a
Queue Shaper Profile to a Queue.
To delete a queue shaper profile, select the profile in the Queue Shaper
Profiles Configuration table (Figure 164) and click Delete. The profile is
deleted.
To delete multiple queue shaper profiles:
1 Select the profiles in the Queue Shaper Profiles Configuration table or
select all the profiles by selecting the check box in the top row.
2 Click Delete. The profiles are deleted.
7.6.3
Configuring Service Bundle Shaper Profiles
This section includes:
Adding a Service Bundle Shaper Profile
Editing a Service Bundle Shaper Profile
Deleting a Service Bundle Shaper Profile
7.6.3.1 Adding a Service Bundle Shaper Profile
To add a service bundle shaper profile:
1 Select Ethernet > QoS > Shaper > Service Bundle Profiles. The Service
Bundle Shaper Profile page opens.
