FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 224 of 597
7.6.2.1 Adding a Queue Shaper Profile
To add a queue shaper profile:
1 Select Ethernet > QoS > Shaper > Queue Profiles. The Queue Shaper
Profile page opens.
Figure 164: Queue Shaper Profile Page
2 Click Add. The Queue Shaper – Add page opens, with default values
displayed.
Figure 165: Queue Shaper Profile
– Add Page
3 In the Profile ID field, select a unique ID to identify the profile. Permitted
values are 1-31.
4 Optionally, in the Description field, enter a description of the profile.
5 In the CIR field, enter the Committed Information Rate (CIR) assigned to
the profile, in bits per second. Permitted values are:
16,000 - 32,000,000 bps, with granularity of 16,000.
32,000,000 - 131,008,000 bps, with granularity of 64,000.
6 Click Apply, then Close.
