Evolution® IP-20LH
Installation Guide
Ceragon Proprietary and Confidential
Page 91 of 101
9.3
Configuration
Before connection over the radio hop is established, it is of high importance
that the elements are assigned a dedicated IP address, according to an IP plan
for the total network.
Note:
If connection over the hop is established with identical IP
addresses, an IP address conflict will occur, and remote
connection to the element on the other side of the hop may
be lost.
By default all elements have the same IP settings:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Note:
After the new IP address is set, the contact with the element
will be lost. In order to reconnect, the PC must have an IP
address within the same subnet as the element.
In addition to setting the IP addresses, the following configuration steps
should be performed in order to establish basic connectivity. For a detailed
description of these procedures, refer to the Evolution IP-20LH User Guide,
DOC-00043450
.
Unmute the Radio
