Evolution® IP-20LH
Installation Guide
Ceragon Proprietary and Confidential
Page 88 of 101
9.
Performing Initial Configuration
This section describes how to establish a management connection with the
IP-20LH unit and lists the configuration steps that should be performed in
order to enable basic radio connectivity. For detailed configuration
instructions, refer to the Evolution IP-20LH User Guide, DOC-00043450
.
9.1
Establishing a Connection
You can connect to the IP-20LH unit via a Serial or a LAN connection.
9.1.1
Connecting to the Unit with a Serial Connection
1 Connect a serial RS-232 cable with an RJ-45 interface from the laptop or
PC you are using to configure the unit to the Terminal Interface on the TCC.
Terminal Interface on TCC
2 Configure the following settings for the COM port you are using on your PC
or laptop:
Bits per Second – 115,200
Data Bits – 8
Parity – None
Stop Bits – 1
Flow Control - None
