background image

3. Using the remote control

3. Using the remote control

3. After setting the mode, operation will start in the 
   selected mode.

- Shortly after setting is complete, the screen will return to the main screen.

Wait!

- When the Main mode is paused, the abdominal vibration mode will be paused also,
  and will resume when the abdominal vibration projector start button is pressed.
- When the abdominal vibration projector mode is paused while using the product,
  the pause image will be displayed.

Wait!

- When the product is closed, the closed product image will be displayed.

Sequential pressing

(Strengths 1-3 are selected sequentially)

Using the abdominal vibration projector mode

Adjusting the abdominal vibration projector strength

5

5

3

Delete

speed

Stored music

5 / 

Volume

5

Vibration projector

modeShade

Automatic

mode1

Strength

3

3-sphere projector

/ Abdominal vibration projector

1. Check if the abdominal vibration projector is connected
   correctly.

- The current status will be displayed.

1

1

2

2

1

1

2

1

2

29

28

  - The mode can be adjusted by clicking on the icon or toggling between 
     the up/down buttons to cycle through modes 1-3.

2. To initiate the abdominal vibration projector, click 
   the appropriate icon and press the start/pause button.

Caution

- Do not operate the abdominal vibration projector on the floor.
  (The surface of the product may be damaged.)

Mode 1~3 Approximately 18 minutes

Sequential press (Modes 1~3 are selected sequentially)

2. Adjust the strength of the abdominal vibration projector
   by selecting the appropriate icon, then pressing 
   the start/pause button.

- You can set the desired mode by using the vibration projector strength
   button or the up/down button while the relevant item is highlighted in
   yellow.
- Strength can be set at levels 1~3.

1. Check the screen of the remote control.

- If properly connected and recognized, the icon will be displayed.

3. After the adjustments are made and recognized, 
   the mode will start at the selected strength.

- Shortly after the setting is complete, the screen will return to the 
  main screen.

Low temperature burns may occur, so avoid any direct skin contact with 
the abdominal vibration projector and 3-sphere projector(optional product)
and do not use the product on body parts which are less sensitive or with
poor blood circulation (around eyes, neck, armpits, backs of knees, etc.) 
for a long period of time.

Caution

Summary of Contents for CGM MB-1701






























Reviews: