Assembly of Madero feed air connection "at rear"
Then open the front operating door
and unscrew the feed air box panel
(four screws). . .
If the feed air connection on the
Madero is to be fitted at the rear,
the pre-glazed panel in the rear
wall must be taken out first. To do
this, cut through the webs and take
the panel out.
In order to fit the feeder connection at the rear, the feed air box must be removed. To do this,
unscrew the four screws which is used to fix the feed air box under the ash pan compartment
and pull the feed air box out to the front.
51
