background image

The MP412 System Features
CONGRATULATIONS!

You have acquired a 4-line, fully featured music-on-hold and external paging unit designed to work with the

NSQ412 telephone system. Features include:

• Power and Paging LED
• Universal Music on Hold Input Jack
• AutoPlay Music on Hold (using built-in music IC)
• Universal Paging Output Jack
• Single Page Output
• All Page Output
• Paging Volume Adjustment

The Box Contents

Carefully remove the unit from its shipping carton. If there are any visible indications of damage to the unit or accessories, do not attempt to operate it.
Call International Resources at (888) 772-5200 for help.

Check the carton carefully for the following items. You should have:

Keep the box and all packing materials for storing or shipping the MP412. Keep all printed literature for reference. On the base unit bottom, there is a
serial number. Please write it below for future reference:

MOH 412 SERIAL NUMBER: ______________________________________

Some of the following information may not apply to your particular product; however, when using telephone equipment, basic safety 
precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet  basement or near a swimming 

pool.

5. Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked 

or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation unless proper ventilation is provided.

6. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for 

possible special disposal instructions.

7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.
8. Do not overload wall outlets and extension cords as this can result in the risk of fire or electrical shock.
9. Never push objects of any kind into the product through cabinet slots as they may touch dangerous voltage points or short out parts that could 

result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

10. To reduce the risk of electrical shock, do not disassemble this product, but take it to a qualified serviceman when service or repair work is 

required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when 
the appliance is subsequently used.

11. Do not expose the telephone to extreme temperatures such as found near a hot radiator or stove, or in a car parked in the summer sun.
12. Do not place lighted candles, cigarettes, cigars, etc., on the telephone.
13. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
14. Never install or modify telephone wiring during a lightning storm. Avoid using a telephone (other than a cordless type) during an electrical storm.

There may be a remote risk of electrical shock from lightning.

15. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
16. Use caution when installing or modifying telephone lines.
17. Do not use the phone to report a gas leak in the vicinity of the leak.
18. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions.

A. When the power supply cord or plug is damaged or frayed.
B. If the product has been exposed to rain or water.
C. If the product does not operate normally by following the operating instructions.
D. If the product has been dropped or the cabinet has been damaged.
E. If the product exhibits a distinct change in performance.

SAVE THESE INSTRUCTIONS

3

1

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

2

MP412 Manual_rev.qxd  6/15/05  12:23 PM  Page 4

Summary of Contents for MP412









Reviews: