T600 GASSER CONVERSION
Page 16
1
2
3
4
5
6
No.
Description
Qty
Part #
1
1
1
1
18x24x16 One-way Bearing(
单向轴承
)
CNBB1824A
Main Shaft Auto Sleeve(
主齿轮铁套
)
103T Main Gear(
103齿齿轮
)
Main Gear Case(
主齿中心座
)
HW6057T6H
6
1
M3X8 Button Head Screw(
圆头螺丝
)
CNM3X8BHCS
15x24x2 Flat Washer(
铜平面垫片
)
7
Tail Drive Gear (
副齿轮
)
HI6057T6
H60020A*
CNM15X24FW
1
HW6057T6
CNM3x8BHCS
18x24x16
15x24x2
7
3
4
1
6
2
5
MAIN GEAR ASSEMBLY
For the roller bearings, we recom-
mend a very light oil. The oil MUST-
NOT attack/break down plastic as
this could damage the cage in the
one-way bearing. Prior to applying oil,
make sure to clean the roller bear-
ings with a cotton swab making sure
there is no debris in the bearings.
Drop some medium threadlock into the
six holes on the main gear case. Then
use the M3x8 button head cap screws
and install through the main gear case.
Make sure to use threadlock sparingly
as to not get excess threadlock onto
the plastic gear.
If in the future your one-way bearing or
sleeve is worn or damaged, it is highly
recommended to replace the sleeve and
one-way bearing hub at the same time.
DIRECTION OF
FREE SPIN
Shorter side of protru-
sion on one-way hub
should be facing up go-
ing into the gear.
