4 • Owner’s manual - Model. CC6121.2
12V 6V
Battery voltage selection switch
ELECTRICAL PARTS & ACCESSORIES:
AC Power:
SAA 2 Pin AU Plug
DC Output Lead:
1.2m with quick connect
Charging Leads:
Quick connect 60cm Crocodile Clip harness and 60cm
Ring Terminal harness
TECHNICAL SPECIFICATIONS:
Model Number
CC6121.2
Output
1.2A @ 6V DC & 12V DC
Input Voltage
100-240Vac / 0.4A - 0.2A (22W) - 12V
100-240Vac / 0.24A - 0.12A (11W) - 6V
Input Frequency
50/60Hz
Charge Voltage
7.2V / 14.4V
Float Voltage
6.8V / 13.6V
Start Voltage
3V / 8V
Operating Temperature
-10 to 40° C
Storage Temperature
-25 to 85°C
Operating Humidity
90% RH Max.
Size (L*W*H)
109mm x 64mm x 35mm
Weight
500g (approx.)
Approvals
CE, AS/NZS, EMC
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (On Sealed Maintenance Free batteries, check the State of
Charge indicator). If necessary, remove the vent caps and add distilled water so the levels are
halfway between the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible.
Visit http://www.centurybatteries.com.au/battery-charging or
http://www.centurybatteries.co.nz/battery-charging for further advice.
•
Ensure the battery is in a well ventilated area and the charger should be as far away from the
battery as the cables permit.
•
IMPORTANT
: Please make sure the correct battery
voltage is selected to suit your battery type. For 6V
batteries make sure the unit is switched to 6V and for
12V batteries make sure the unit is switched to 12V.
The battery voltage select switch is located on the left
hand side of the charger.
