Copyright Century UK Limited 2018 www.centuryuk.com
Revision V1.0
3. Vertical Fin &
Rudder
Install the vertical fin and
rudder assembly into the
slot in the fuselage. Please
make certain that the tail-
wheel control wire is located
correctly in the rudder slot as
shown.
If desired, a small amount of
foam glue can be used for
maximum security
1. Undercarriage
Fix the undercarriage in
position with the four 2.6 x
12mm self-tapping screws as
shown. If the screws become
excessively tight whilst fixing,
simply back them off a turn or
two, and then continue. Note:
The undercarriage legs are
angled towards the front of
the fuselage.
2. Horizontal Tail-Plane
Remove the moulded tab at the end of the fuselage with a sharp knife. Slide the horizontal
tail-plane into the fuselage slot as shown. Make certain that the holes in the tail-plane line-up
with the corresponding fuselage holes. If desired, a small amount of foam glue can be used for
maximum security.
4 x 2.6 x 12mm Screw