CW2500 Insert Installation and Operation Manual
49
Appendix 1: Optional Faceplate and Decorative Trims
Installation
Note: The illustrations may vary from one model to another, but the method of assembly
remains the same.
Remove the faceplate panels from its box.
Place the faceplate panels with the finished side down on a flat, soft, non-abrasive surface
and follow the installation instructions below;
Hardware bag content:
8 - #10-24" x 1/2" bolts
2 - Corner bracket and screws
8 - Trim retainer
8 - #10-24" hex nuts
Line up the holes of the upper
faceplate panel (A) with the
holes of the side panels (B) and
(C). Secure them together using
four (4) bolts (D) and nuts (E)
provided (see DETAIL A).
Partially thread the screws (F)
on the trim's corner bracket (G)
then superimpose the corner
brackets (G) and (H) as shown
in the image on the left.