Century FW3000 Installation and Operation Manual
40
The blower has a rheostat, see the
illustration on the right to identify the
different adjustment positions; either from
high (HI) to low (LO) or closed (OFF).
When using the blower, allow the stove to
reach operating temperature (approximately
one hour), before turning it on. The
increased airflow from the blower cools the
firebox and could affect the start-up
combustion efficiency if the blower is turned
on too early. You can also install a
thermodisc to enable the blower to start or
stop automatically when the stove is hot or
too cold. The thermodisc part number is
AC05530 for a basic model and ACO2055
for a quick connect model. Installation
instructions are supplied with the blower
and the thermodisc.
CAUTION: ENSURE THAT THE BLOWER
’S POWER CORD IS NOT IN CONTACT
WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE
DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.
