INSTALLATION
Open the box and check if below all items are included in the box.
KEY BOARD
1
JUNCTION BOX
1
8P RJ45 MODULAR CABLE (2mm)
1
There is one Connector on the Controller, Which Connector is RJ45 For Master Control.
Connect RJ45 on the rear of controller and DATA on the junction box and plug in DC
12V power to DC jack.
Open the Junction Box cover and set slave interface jumps (LAN,RS232)
Default setting for TB-CN2R1 (2 Axis standard) and TB-CN3R1(3 Axis standard) is by
RS-232 and TB-CB3R1W (3 Axis WEB) is by web.
Connect CAM1(RS485(+), RS485(-)) on Junction Box Terminal and communication
jack on PTZ camera. (Please make sure of polarity)
When you use DVR together, in case of TB-CN3R1W, connect LAN on the junction
box and LAN cable, In case of TB-CN3R1, connect 9 pin D-SUB Jack
Turn on the power and then you will be in starting mode.
·
·
·
CONNECTOR
A.
B.
C.
D.
E.
7
Summary of Contents for TB-CN2R1
Page 15: ...DIMENSIONS 15...
Page 16: ...Made in Korea April 2006...
