Centurion Superclip Series, User Manual, Page: 15 / 34

Centurion Clip User Manual
Samsung E330 Code Reader
Models: E330
LED Sequence: Off, On, Off, Off
Phone: Powered Off
Connector PS2, E700 Connector
1. Switch on the Superclip and select Samsung E330
2. Connect the phone.
3. Press “Enter” button.
4. Power on the phone, Phone should go into "TAT" mode
5. Codes will be read in 1 second.
6. The clip will then warn you the code is about to be displayed (LEDs will sequence up and
down, Knight Rider style)
7. All 4 LEDs will then flash the first number, there will be a 2 second gap between each number.
8. All 4 LEDs will remain on after the last number.
Read the unlock code from the phone using the clip. The superclip will then give you the code on the LEDs of
the clip... All 4 LEDs will blink and tell you what number. So for number 4 all 4 LEDs will blink 4 times. For
"0" LEDs will flash 10 times.
http://www.centurionclip.com
Page. 15