14
OPERATION
Get Started:
1�
Unscrew the fixing nut from the motor housing by rotating it anticlockwise.
2�
Place the rear guard over the motor spindle and replace the fixing nut by
screwing it clockwise�
3�
Take the fan blade and push it onto the motor spindle.
4�
Remove the guard nut and screw from the front guard.
5� Turn the three clips around the outside edge of the front guard outwards�
6� Hang the front guard over the top of the rear guard and push the clips
inwards until the front guard is fastened to the rear guard�
7�
Finally fit the nut and screw through the hole in the bottom edge of the
front guard arrowed and tighten with a screwdriver�
8�
Adjust the speed, pivot and oscillation of the fan by its controls.
SPECIFICATIONS
Product name
FMB26
Power supply
AC 220-240 V, 50/60 Hz
Effect
30 W
Included in packaging
- Table fan
- User manual
Dimensions
270 x 210 x 400 mm
Weight
1�26 kg
