3. Features and Functions
Introduction
The
D2 Turbo
sliding gate motor's advanced functions are controlled by
an intelligent electronic controller.
3.1. Gate Operation
3.1.1. Full Gate Opening
The CentSys remote controls
supplied with the
D2 Turbo
are used to operate
the gate.
However, most automatic gate
installations are also fitted with
an intercom, which provides for
communication between the
house or building and the gate.
The handset is usually fitted
with a gate pushbutton which,
when pressed, sends a signal to
the
D2 Turbo
controller to
operate the gate.
FIGURE 4.
FIGURE 5.
3.1.2. Modes of Operation
To operate the gate to open fully, the
D2 Turbo
has three modes to
choose from depending on the application. Only one mode can be
selected at any given time.
3.1.2.1. Standard Mode
Standard Mode is the most commonly used mode for domestic
applications as it allows full control of the gate. Press the remote
control button for approximately one second to get the gate in
motion. If the remote control button is pressed while the gate is
Features
and
Functions
page 6
